1A to 5A variable fast charger for your electric scooter. Reduce charging time by 60% – 70%. Max voltage 67.2 for electric scooters with 60V system and GX16 3-pin connector. Display shows both voltage and current during the charging process.

NOTE: For 60V systems only. Do not use on 48V, 52V or 72V systems. Not to be used in conjunction with any other charger.

Variable Amperage

Set the dial to choose how fast you want to charge, from 2A (same as the standard charger that comes with the scooter) to 6A (3 times the standard charger). Note that it’s not recommended to use fast charging (over 2A) on a regular basis, as too much use will degrade the overall life of your battery. Use fast charge only when needed.

Variable Max. Charge

Choose your target charging level of 80% (63.4V), 90% (65.3V) or 100% (67.2V max). The charger will only charge up to the selected voltage. Charging to 80% is best for battery longevity. Note that after charging is complete, the measured battery capacity may not read exactly 80%, 90% or 100%, but the battery will be charged to the specified voltage (remaining capacity shown on the scooter display is only an approximation).

Automatic Charge Optimization

When the battery is around 80%, the constant current phase is completed and the current will drop. This is the beginning of the constant voltage phase which will charge at lower current until it automatically stops at 100%.

Dual Input Voltage

Choose input voltage depending on your location (110V or 240V). Preset to 110V for US/Canada.